The Swimming Pool Floating Bed is an inflatable mattress for floating and relaxing on the water. When unfolded, it creates a flat, supportive area close to adult height. An integrated headrest at the front allows the body to maintain a supine position and reduces neck pressure. The outer layer is made of a smooth, environmentally friendly material that absorbs water upon contact with the surface, creating a low-friction environment for easy turning over. The intuitive inflation/deflation valve design allows users to inflate and deflate the mattress at the poolside, without the need for complicated tools. Multiple colors are available, and custom logos are supported. Suitable for personal and commercial use.
Place of Origin: China
Product Name: Inflatable bed
Color: Selectable
Size: Customized Size
Logo: Accept Customized Logo
Packaging: opp bag/Brown box/color box
Transportation: Express, sea, land, air
Type: Inflatable bed
Material: Eco-friendly PVC
Payment Method: T/T
Terms of Trade: T/T
High Load Capacity
The Swimming Pool Floating Bed boasts excellent load-bearing capacity, with its internal air chambers forming a stable support structure through a multi-corrugated, zoned design. The recommended unfolded size for a standard adult is 180 x 70 cm, covering an area of approximately 1.26 square meters, and can stably support two users weighing under 60 kg.
Safe Materials
The main body is made of environmentally friendly PVC, with standard thickness options ranging from 0.22 to 0.30 mm. It has a Shore A hardness of 65 to 75, ensuring both flexibility and avoiding excessive rigidity. The material has passed phthalate limit testing, with total volatile organic compounds less than 0.1 mg/m³. The surface layer withstands hydrolysis for ≥500 hours and exhibits no blistering or delamination after 48 hours of salt spray testing, making it suitable for long-term contact with pool water.
Reliable Sealing
The internal structure features continuous corrugated air channels and a zoned welded structure. The heat-sealed weld width is no less than 8 mm, and the weld strength is ≥75% of the material's inherent strength. Under standard conditions, after 24 hours of static storage, the pressure drop does not exceed 5%. The integrated quick-opening valve features a one-way check valve, with a rated working pressure of 0.08 to 0.12 MPa. Even after inflation at 35 degrees Celsius, the valve body maintains a reliable seal, reducing the probability of slow leakage during prolonged use.
Sun and Chlorine Resistant
The outer layer incorporates a UV absorber. After 600 hours of UVA340 lamp aging testing, the tensile strength retention rate is ≥80%, and the color difference ΔE is less than 2. After 168 hours of cyclic immersion in chlorinated pool water at an effective chlorine concentration of 3 to 5 mg/L, the material shows no significant fading or cracking.
Portable and Compact
Each piece weighs approximately 800 to 1100 grams. When deflated and folded, its volume is approximately 25 × 18 × 8 cm, occupying less than 3.6 liters of space in a backpack or suitcase. With a standard large-diameter valve, the inflation time is approximately 60 to 90 seconds with an electric air pump at a flow rate of 150 liters per minute; and approximately 2 to 3 minutes with a manual foot pump at a flow rate of 70 liters per minute.
Family Pools
Swimming Pool Floating Beds are suitable for family relaxation and leisure time in private family pools. Based on typical family pool dimensions of 6-10 meters in length and 3-5 meters in width, this product occupies less than 5% of the water surface, allowing for easy staggered placement when multiple people use it simultaneously. The colorful exterior can match the pool landscape, and different colors can be used to distinguish family members, reducing hygiene management issues caused by shared use.
Public Pools
Suitable for residents of clubhouses and apartment public area pools for rental services. Management can set a turnover rate of 5-20 beds based on the number of residents, coordinating with front desk registration and disinfection processes, and offering pay-per-use or membership benefits to increase the length of time spent at public facilities and repeat visits.
Resorts and B&Bs
Suitable for resort hotels and B&Bs for pool photography and relaxation packages. Presenting floating beds with a unified color scheme in room descriptions and photos can improve page conversion rates. According to past data from accommodation platforms, room photos showcasing pool props typically increase click-through rates by 8% to 15%, thereby driving increased booking inquiries.
Water Park
Suitable for adding value to the still water area of small water parks. Based on a peak hourly visitor flow of 300 people, installing 30 rides with a 20-minute rotation schedule can serve 90 people per hour, demonstrating high equipment turnover efficiency. By providing a deposit and disinfection points, the experience can be expanded and additional revenue generated without adding complex equipment.
Inflation Guidelines
Inflate until the surface feels firm and springy to the touch. When the ambient temperature exceeds 35 degrees Celsius, inflate to 80% full to allow for thermal expansion. Ensure the valve is tightened securely. Do not use high-pressure air sources and avoid exceeding the rated pressure of 0.12 MPa. For first-time use, it is recommended to let the water stand for 10 minutes to recheck the pressure before use to reduce pressure fluctuations caused by temperature differences.
Water Area Restrictions
Only suitable for calm water surfaces and pool areas of specified depths. Do not use in open water, deep channels, or areas with equipment intakes. Children must be supervised by an adult at all times and wear compliant personal buoyancy aids. Do not use as a lifesaving device. Do not use in windy weather or when restricted by pool management.
Chemicals and Cleaning
Rinse and dry with clean water after each use. Avoid prolonged contact with high-concentration chlorine disinfectants and solvent-based cleaners. It is recommended to use a neutral cleaning solution and allow to air dry naturally after wiping; avoid high-temperature drying. Prolonged exposure to surfaces containing sunscreen or essential oils can accelerate plasticizer migration; timely cleaning is necessary to extend material life.
Storage and Maintenance
For short-term storage, deflate and fold the container in a cool, dry place. For long-term storage, ensure it is completely dry and place it in a storage bag with ventilation holes to avoid pressure that could cause creases to form. Check welds and valves monthly for leaks using the soapy water foam test. If minor scratches are found, repair them as soon as possible with a PVC repair patch using heat pressing to prevent the scratches from spreading.
Under normal use, a Swimming Pool Floating Bed can be used continuously for approximately 6 to 8 hours on a single inflation without needing to be re-inflated. In high-temperature environments or under prolonged direct sunlight, the gas volume may slightly change due to thermal expansion and contraction; this is a normal physical phenomenon. It is recommended to check the air pressure before each use and re-inflate as needed to maintain optimal support.
This product is designed for adults and teenagers, with a recommended weight range of 40 to 100 kg. Children can use it under adult supervision, but the pool depth must not exceed half their height. For the elderly or those with mobility issues, it is recommended to float in shallow water for a safer and more relaxing experience.
Use a dedicated air pump when inflating, maintaining the air pressure between 0.08 and 0.12 MPa. Inflate until the surface is flat but still elastic. Over-inflating can cause increased material stress due to thermal expansion under direct sunlight. To deflate, open the vent at the bottom of the valve and gently press and fold to completely empty the air cushion within 2 minutes.
Ordinary pool water will not damage the material. The PVC film of the product has passed the chlorine resistance test (no discoloration after immersion in 3 mg/L chlorine concentration for 168 hours). However, some oil-based sunscreens may react with the plastic surface, potentially causing stickiness or discoloration. It is recommended to rinse with clean water and wipe dry with a cloth after use. If not cleaned for a long time, residual chemicals may affect the material's lifespan.
For pinholes or minor scratches, hot-press repair can be performed using a PVC-specific repair patch. First, clean and dry the damaged area, then apply the repair patch and apply pressure with a hot air blower at 70-90 degrees Celsius for 30 seconds to ensure a firm bond. After repair, let it sit for 2 hours before inflating and using. It is recommended to inspect the weld and valve area before each use. If the damaged area exceeds 2 cm or is located at the weld, use should be stopped to avoid safety risks.
Mobile Phone:
Phone:
Contact Now
Youtube